Universal Specific Gravity Abrasion Foaming Rate Tester For Plastic  

Model: QL-300AW / QL-600AW

Application:

Plastic factories, wire and cable factories, pipe factories, packaging materials, insulation materials, pastes, new materials research laboratories, etc.

Principle: 

Comply with GB/T 533, GBT/1463 2005, ISO 2781, ASTM D 297, DIN 53479, ASTM D792, ISO 1183, MS213-24, GB/T1033 and other standards, adopt Archimedes principle buoyancy method, accurate and straight Read the measured value.

Function description:

1. Use the latest version of the conversion software, without any calculation, 2 steps of operation, 5 seconds to accurately and quickly measure such as: rubber plastic blocks, PVC/PP/PE plastic particles, polyurethane foam, silica gel/asphalt glue and other solids, Density and specific gravity of granular, floating and colloidal materials;

2.  Using DIN and AKRON Aker abrasion test methods, it can be used to detect DIN abrasion, AKRON Akron abrasion volume and abrasion index of materials such as automobile tires, rubber, conveyor belts, and EVA shoe materials;

3.  According to (JIS-K-6258) and (ISO1817) standards, it can be used to detect the mass change rate and volume expansion rate of oil seals of rubber materials such as vulcanized rubber, rubber seal rings, and oil rings;

4. For foam plastics such as polyurethane, polypropylene PP, polyethylene PE, EPS, etc., the foaming ratio and quality change rate can be measured;

5.  It has the function of compensation setting of solution temperature and density, and distilled water or tap water can be used as the measuring medium;

6. The design of one-piece water tank and lightweight hanging railing can greatly reduce the measurement error caused by air buoyancy

Specification parameter table: