Magnetic Material Density And Water Absorption Rate Tester / Silicon Oil Method Densimeter
Model: MZ-I300 MZ-I600 MZ-I150 MZ-I3000 MAY-Eteris120/220
Standard Specification:
According to ASTM B311, MPIF Standard 42, JIS Z2505, GB/T5163 and other specifications. It is suitable for the measurement of sealing wax method, boiling method, vacuum saturation method, and silicone oil medium method. According to the Archimedes buoyancy method, the measurement value can be quickly read.
Application:
Manganese-zinc ferrite, nickel-zinc ferrite, neodymium iron boron and samarium cobalt, neodymium, dysprosium, permanent magnets, secondary battery lithium, nickel, cobalt, manganese, mixed rare earth and other rare earth metal materials, disintegrate in water Materials, new materials research laboratories, etc.
Features:
1. Digital display direct reading, without manual calculation, direct display of density and volume.
2. Porous materials, dense non-absorbent materials, powders and similar products can all be measured quickly.
3. The German original HBM sensor is used for accurate measurement, easy operation, stable and durable.
4. It has the function of actual water temperature compensation, which can adapt to changes in the test environment.
5. The density of the medium can be set, water is used as the medium, and other liquid mediums can also be used.
6. Adopting one-piece high-capacity measuring platform, corrosion-resistant and drop-proof, free replacement for life.
7. The high-precision series is equipped with a special wind and dust cover, which is convenient and durable.
8. Equipped with a dedicated printer, digital display direct reading, fast printing of measured values.
9. Mayzun-Smart multi-group sample measurement system is optional, which can measure 10 groups of data at a time to realize high-efficiency measurement, print A4 standard data reports with one key, and store more than 100,000 groups of data.
MZ-I150 function description:
1. For water-absorbing green embryos or sintered rare earth metal materials, the volume density, wet density, apparent density, apparent porosity, water absorption, open pore volume, sealed pore volume, and total porosity can be read using the media method.
2. The volume density can be read directly by applying the sealing wax method.
3. Silicone oil can be used as a medium to directly read the density and volume of the product.
MZ-I300/I600 function description:
1. For water-absorbing green embryos or sintered rare earth metal materials, the volume density, apparent density, apparent porosity, and water absorption rate can be read by the media method.
2. The volume density can be read directly by applying the sealing wax method.
3. Silicone oil can be used as a medium to directly read the product density.
Technical parameters:
(Note: A large range of large-scale density meters can be customized according to customer needs, and the maximum can be customized 6-30kg)
Brand | MAYZUM（Warranty for 3 years） | |||||
Model | MZ-I300 | MZ-I600 | MZ-I150 | MAY-Entris120/220 | ||
Weight accuracy & Max load | 0.005g / 300g | 0.01g / 600g | 0.001g / 150g | 0.0001g / 120g/220g | ||
Density Precision | 0.001 g/cm3 | 0.001 g/cm3 | 0.0001 g/cm3 | |||
Measuring efficiency | Test 1 set of samples at a time | Test 10 set of samples at a time | ||||
Density Range | 0.001~99.999g/cm3 | |||||
Water absorption & porosity accuracy | 0.01% | |||||
Principle | Archimedes principle of drainage | |||||
Testing Time | About 5 seconds | |||||
Testing Procedure | 1. Put the sample on the measuring table and press MEMORY to save 2. Put the sample into the water measuring table and press the MEMORY key to save it. The instrument directly displays the density and volume etc. (Magnetic materials can be measured using silicone oil/kerosene as the medium) Remarks: Refer to the random instruction for testing the porous materials | |||||
Results Displayed | Volume density, wet density, dry density, apparent porosity, water absorption, opening volume, sealing volume, total porosity | |||||
Parameter Setting | Water temperature setting, medium liquid density setting | |||||
Calibration | One-key automatic Calibration | |||||
Output Method | RS-232C standard communication interface, convenient for test data output and printing | |||||
Temperature and Humidity Range | Allowable ambient temperature: 0~45℃; Allowable relative humidity: within 80% | |||||
Power Supply | AC~220V / 50HZ（Export power supply needs to be customized, please indicate before ordering） | |||||
Tank Size | 150*100*90mm | |||||
Standard accessories | ①Host computer ②Sink ③Measuring table ④Tweezers ⑤Bubble dropper ⑥Weight ⑦Power transformer ⑧Particle measuring accessories ⑨Floating material measuring accessories | |||||
Optional accessories | MZ-P1 printer MAYZUM-Smart v 6.0 Porous material density water absorption porosity measurement system | |||||
Other Parameters | Outer packing size: 395*195*330mm Tester size: 210*195*185mm Net weight : 3.5kg Gross weight: 4.5kg HS code : 90160090 | |||||
MZ-I300/I600 Accuracy:0.001g/cm³
| MZ-I150（Equipped with windproof and dustproof cover） Accuracy:0.0001g/cm³ |
Patented product: Intelligent MAY-Entris120 / MAY-Entris220 Accuracy:0.0001g/cm³
| MZ-I3000（Size can be customized on demand） Accuracy: 0.001g/cm³
|
Remarks: For small parts (parts weighing less than 5g), please select the high-precision intelligent MAY-ENTRIS120 series
Preview of intelligent MAY-ENTRIS120 series measuring system:
