MOC120 Shimadzu Moisture Meter
Product description:
Adopt the new quality sensor "Uni Bloc"
Accurate automatic determination of moisture content
Use wide weighing pan (130mm)
A large number of samples can be loaded thinly and uniformly, and rapid and precise measurements with small deviations in drying can be performed.
The medium-wave infrared quartz heater with excellent drying rate for a wide range of samples can achieve an ideal drying state and has a long service life (20.000~30.000 hours).
"Uni Bloc" is used in the balance part of the heart measurement
It is not easily affected by temperature changes and can easily measure to 0.001g units.
Measurement methods can be selected through the combination of automatic stop and time stop 2 stop methods and standard, fast, slow, split and other drying methods.
In addition, each sample is combined with measurement conditions such as the measurement temperature monitoring range through the measurement method. There are a total of 10 measurement modes that can be registered in advance, and the measurement mode suitable for the sample can be set immediately.
Equipped with the variation range display of the analog bar graph that can monitor the mass variation at any time during the measurement.
The drying status can be confirmed visually, so that the end time can be estimated easily.
Built-in Shimadzu's unique "through window" function
The measured value can be easily transferred to Excel, etc. After the values are loaded into Excel, etc., you can use functions such as numerical calculations and graphing to freely perform data processing. Only one RS232C cable is required for connection, no interface connection, software installation, etc. are required.
Loaded automatic tare function
Measurement method while performing automatic zero adjustment of the balance. Even for long-term measurements, extremely accurate measurements can be made through zero-point drift correction.
Equipped with a deviation correction function for the measured value.
The measurement results can be unified with the measurement data using other devices or methods.
Adopt a large LCD with backlight, which is convenient for operation in dark places.
